Wednesday, May 30, 2007

Performance Car Tuning




Performance tuning is the tuning of an engine to increase the power output, torque, and responsiveness of the engine as well as the reliability and economy. To performance tune the engine, it must be strong enough to endure the extra power, sometimes far stronger than the standard engine. Also when Performance Tuning the car you must take into account the transmission, suspension and the brakes to make sure that these match the power output and torque of the engine as this will affect the overall performance of the car and make it more reliable and competitive. Most people want to increase the power output of an engine. The main way that is used to do this is to increase the rate and efficiency of combustion in an engine. This is achieved by putting more fuel/air mixture into the engine, using a fuel with higher energy content, burning it more rapidly, and getting rid of the waste products more rapidly - this increases volumetric efficiency. The specific ways this is done include:

• Increasing the engine displacement. This can be done by "boring" - increasing the diameter of the cylinders and pistons, or by "stroking" - using a crankshaft with a longer stroke (in combination with pistons of shorter compression height, to maintain the original compression ratio), or both.

• Using larger or multiple carburetors, to create more fuel/air mixture to burn, and to get it into the engine more quickly. In modern engines, fuel injection is more often used, and may be modified in a similar manner.

• Increasing the size of the valves in the engine, thus decreasing the restriction in the path of the fuel/air mixture entering, and the exhaust gases leaving the cylinder. Using multiple valves per cylinder results in the same thing - it is often more practical to have several small valves than have larger single valves.

• Using larger bored, smoother, less contorted intake and exhaust manifolds. This helps maintain the velocity of gases. Similarly, the ports in the cylinder can be enlarged and smoothed to match. This is termed "Cylinder head porting", usually with the aid of an air flow bench for testing and verifying the efficiency of the modifications.

• The larger bore may extend right through the complete exhaust system, using larger diameter piping and low back pressure mufflers, and through the intake system, with larger diameter air boxes and high-flow, high-efficiency air filters. Muffler modifications will change the sound of the car's engine, usually making it louder; for some tuners this is in itself a desirable property.

• Increasing the valve opening height (lift), by changing the profiles of the camshaft or the lift (lever), ratio of the valve rockers (OHV engines), or cam followers (OHC engines).

• Optimizing the valve timing to improve burning efficiency - usually this increases power at one range of operating RPM at the expense of reducing it at others. For many applications this compromise is acceptable. Again this is usually achieved by a differently profiled camshaft. See also Four-stroke cycle Valve Timing, variable valve timing.

• Raising the compression ratio, which makes more efficient use of the cylinder pressure developed and leading to more rapid burning of fuel, by using larger compression height pistons or thinner head gasket, or by milling "shaving" the cylinder head.

• Forced Induction; adding a turbocharger or supercharger. The fuel/air mass entering the cylinders is increased by compressing the air first, usually mechanically.

• Using a fuel with higher energy content or by adding an oxidizer such as nitrous oxide.

• Changing the tuning characteristics electronically, by changing the firmware of the engine management system (EMS). This chip tuning often works because modern engines are designed to give a great deal of raw power, which is then reduced by the engine management system to make the engine operate smoothly over a wider RPM range, with low emissions. By analogy with an operational amplifier, the EMS acts as a feedback loop around an engine with a great deal of open loop gain. Many modern engines are now of this type and amenable to this form of tuning. Naturally many other design parameters are sacrificed in the pursuit of power. The choice of modification depends greatly on the degree of performance enhancement desired, budget, and the characteristics of the engine to be modified. Intake, exhaust, and chip upgrades are usually amongst the first modifications made as they are the cheapest, make reasonably general improvements (whereas a different camshaft, for instance, requires trading off performance at low engine speeds for improvements at high engine speeds), can often improve fuel economy, generally don't affect engine reliability much (because no moving parts are modified), and are in any case essential to take full advantage of any further upgrades.

• Manufacturer Detuned Engines - Changing the tuning characteristics electronically, by changing the firmware of the engine management system (EMS). This chip tuning also works because many manufacturers produce one engine which is used in a range of models and the power and torque characteristics are determined solely by the engine management system software. This allows the manufacturers to sell cars in various markets with different tax and emissions regulations without the huge development cost of designing different engines. Cross platform engine sharing also allows for a single engine to be used by different brands, tuned to suit their particular market.

Time To Give Your Musclecar a Tune Up




How to beef up your ride with more power Gazaam... You can start by making a few minor adjustments with your air filter, believe it or not a clean air filter makes a whole lot of difference. There are a number of different air filter's you can buy, some are very high tech and others are just to expensive. If you cant afford high tech just go with the simple generic brand, "to be honest it probably doesn't make a difference what brand you choose".

Have you tried flushing your block out, you should. With all that water of coolant sitting in there for who knows how long can really do a number on you engine rusting it from the inside out. It's really a good idea to flush it periodically maybe once every 3-4,000 miles just as routine as an oil-change. Just by flushing out all that old fluid and replacing it with new, you can greatly increase you gas-mileage by %10.

How often are you suppose to change those old spark plugs? Well according to the auto professional geeks every 30,000 miles. But why wait that long, do you usually wait intill your bill's are due before you pay them, not inless you have to. So if you can changing you sparkplugs will put the fire back in your beast, also helping with emission and may increase gas mileage aswell.

Fine tuning your distributor, Now this is an old trick that the old timers use, By spinning your distributor a few degrees to fine tune your timing can typically give a giant portion of horse power back in your ride, over time your motor wares down and slows down the timing also. But if your capable of doing this your self, you do not need any expensive equipment to do it, just a screw driver and some patience. With your motor running, after finding the nut-or screw that keeps the distributor from rotating you can turn it just enough to notice a difference right away. Now if you turn it to much in either direction you can kill the engine, but don't worry just gently put it back in place and fire your car back up. Once you get it where you like it, for the best results you want your car to idle right around the neighbor hood of 7,500 rpm's.

Most newer cars have an oxygen sensor, you can find this usually right bellow your factory outtake manifold and at the beginning of your exhaust system. These are call 0-2 sensor and they don't cost much to replace.

Slick your ride up with some grease, you want to find as many grease fitting as you can usually you can find these under the car. there are a few next to the rotor and some of the extending joints, ball joints and tie-rods. Just by doing this you can add an extra 5 years to cars life and give yourself added protection form seizes.

Giving your car just the basic tune-up's doing it yourself can save you allot of money and help protect your car keeping in good shape and running great.

Thursday, January 18, 2007

Cheap Seized Cars - Buy A Great Car From The Government Auction




I'm sure you are dreaming of a sleek sexy car speeding up on your nearby avenues, boulevards, and national highways. Well don't procrastinate, for you can get this car of your dreams for as low as a few hundred bucks by just visiting seized car auctions organized by the government or any auction company.

Seized cars? Are you kidding? No, it's true. These cars are actually those that are privately owned by people who made some crimes like kidnapping, tax evading, and so on. Thousands have been collected by the government and the banks each month so that bunches and bunches of cars leave the government without enough space for them. Only the solution of auctioning them has proven to be effective. Apparently, the government just wants to raise their funds as high as it would allow.

These auctions always happen on the same day of the year (habitually every month or every quarter) and at the same location as well and they are organized by the government. The bidding begins at a hundred bucks or even lower in some cases. Scan your broadsheet or your tabloid classified ads section or visit local agencies and ask for when the next auction would be. If not, try the internet and locate some car auctions at a faster and easier rate.

Another tip, always gather some information on the car that you would be buying so you will know if it is worth the value. Some of the cars have many bidders allowing their price to end up higher than their true value.

Some problems get on hand while visiting such public sales. Prices on some beautiful speedy cars skyrocket once bidding starts. The very cause of this is the presence of a huge crowd. People bid the car and cause the prices to jump fast. You can't stop the prices to blast and only the ugly and non-speedy ones end up still affordable. Skyrocketing prices leave you almost impossible to buy one.

What you should do? Visit seized car auctions that are not highly promoted and where there are only a handful of people. It is the seemingly only answer to this labyrinthine puzzle. Find some membership cards on the internet and voila, you will get enough information on where to find public auctions with great cars but with cheap prices.

But that is now the past. Today, everybody can purchase these cars at lower price due to the increasing number of auctions online. You can even have discounts. However, not all sites keep up with what they say. So find good sites on the internet that keep their promises. Be forewarned to be more speculative in choosing sites that offer discounts!

Before buying a car, have it examined by a car expert so that you will be sure that the car you've chosen works pretty well and is under good condition. You have to do this as auctions have neither warranties nor guarantees.

After buying the car you have chosen, you can now enjoy its speed and comfort while driving. You have successfully acquired an old car with a new owner! Drive it safely and avoid accidents, good luck!

To find seized car auctions, please visit http://www.auto-car-auctions.info

Article Source:expert=Tim_Lee

all about your car

best car videos

car accident videos

Car Tuning 101 - 9 Basic Tips




Your car should get a tune-up, or major service, every 30,000 miles. And, this is probably the best preventative maintenance tip a car owner could get. The components of a good tune-up will check into and replace all the things that cause normal wear and tear on your car. If tune-ups are missed, this could lead to damage and further problems that cost a lot more than a tune-up. In addition, tune-ups can give you better gas mileage. Best of all, tune-ups can be done on your own, saving you the high cost of labor.

Here are the things you will need to do as you tune your own car, as well as an explanation why it is strongly recommended.

1. Fuel Filter- You will want to replace your fuel filter. Dirty fuel filters can lead to difficulty starting the car, can restrict the engine, and cause the car to lose power.

2. Sparkplugs and sparkplug wires- you will want to replace these, as bad plugs can rob your car of fuel efficiency and even take away from drivability. Bad spark plugs can even cause breakdowns, meaning an expensive tow. Bad wires can also cause problems. (See our article on this process)

3. Distributor cap and rotor- these two parts are usually made of plastic, therefore they deteriorate with age and use and cracks may develop, allowing moisture in. Because of this, metal contacts on both can corrode, which causes misfiring.

4. Valves- you will want to check and adjust your valves as needed. Also, you will want to replace the valve-cover gasket, especially when you see oil on the top of your engine.

5. Belts- you will want to check all of your belts to make sure that they are not worn. If they show signs of extreme wear and tear (fraying, tension) you can replace those as well.

6. Air filter- A dirty air filter blocks airflow to the engine, making it work harder. This results in a decline in horsepower and fuel economy.

7. Fluids- check all of your fluid levels underneath the hood. If any appear to be thirsty, give them what they need. (Transmission, brake, etc.)

8. Battery- give your battery a cleaning. (see our article on this process)

9. PCV (Positive Crankcase Ventilation)- this should be replaced because a clogged breather filter prevents the PCV from siphoning the blow-by gases and moisture created by engine combustion. This results in oil breakdown and sludge buildup.

The previous nine tips are the usual for tune-ups. When giving your car a once-over, you may also want to check your brakes, wiper blades, lights and other gauges. Also, while much of the aforementioned parts can be changed with a major service every few years, from time to time, you may need to replace one or more as a stand-alone project. But, all in all, following this guide will keep you with a smooth, reliable ride!

Michael Walker is a freelance author providing tips and hints on engine related topics such as JDM engines,used JDM engines and used Honda engines.His articles are a valuable source of information for the auto enthusiast.

Article Source: expert=Michael_Walker

all about your car

best car videos

car accident videos

Tuning CARburetor The Scientific Way




The carburetor, found in the internal combustion engine, regulates and maintains the right mixture of air and fuel in the engine. When the engine ignites the fuel, the energy in the form of gas is distributed to make the vehicle run. The carburetor is an important auto part and tuning it is crucial.

Making vehicles in tune is a common practice. However, there are still a number of car owners who are not acquainted with the scientific way of tuning automobiles; they stick with the traditional way. However, according to auto experts, more often than not, the traditional way is not always right.

The carburetor performs multiple tasks all at the same time. It calculates the ratio of air to fuel, filters air intake, and distributes the right amount of fuel to feed the engine. Because of the complex nature of carburetors, some automakers are replacing it with the electronic fuel injection. The latter distributes its subtasks to various systems that can handle them efficiently. Hence, the complex process is made easier and simplified.

However, if the car owner knows the scientific and most practical way of tuning his vehicle’s carburetor, he could save a lot. Compared to the fuel injection system, the carburetor is much simpler. Every driver should know that the proper level of fuel is just at the base of the sight hole. If the fuel does not trickle out of the sight hole, you should adjust the float up. Moreover, if the car's gas spills or the carb drips fuel, there is likely a bad seat assembly and needle. The owner of the car should take it away from the top without removing the float bowl. There are several carburetors manufactured in state-of-the-art standards. Weber carburetor parts are meticulously assembled to make them function efficiently without compromising functionality and safety.

Never move the secondary float bowl to the primary and vice versa. The rear float bowl level is lower compared to its front counterpart. This is done to keep fuel from dripping out and into the carburetor's throat during heavy braking. Also, when gas flows out of place due to a bad float, valve or too much fuel pressure, said pressure should be checked. It must be between 4 psi and 7 psi. If the fuel pressure is right, then the problem is on the float or its valve. This situation calls for an immediate replacement. It is better to purchase a complete conversion kit. Weber carburetor conversion kits and other well-regarded brands in the industry offer a complete line of sophisticated carburetor and parts.

In choosing carburetors, one should look into its tuneability and performance. They must be proven by car owners and other auto authorities. In addition, one should also consider the carburetor's versatility. There are those manufactured to suit on a great number of vehicles. The companies offering this kind of carburetor concentrate on quality engineering hence; they have earned trust and loyalty among car owners.

A well-tuned carburetor provides a consistent flow of fuel at nearly all angles. This will prolong the service and ensure good performance of the car.

Terry Brown is a 32 year old from Houston Texas, and an enthusiast for anything auto-related. He currently writes auto-related articles for several publications. You can visit Weber carburetor conversion kits for more information.

Article Source:expert=Terry_Brown

all about your car

best car videos

car accident videos

Wednesday, January 17, 2007

Japanese Import Car Auction - The Best Thing For Your Budget




The car auctions are starting to become more and more popular. Although they are being used for quite a long time now, in the last few years we have seen an increasing desire for people to buy cars from car auctions.

What people surely realized is that although usually the vehicles that are being sold at a car auction aren’t new, they are in pretty good shape and are also pretty cheap. A new market that is starting to grow more and more with every passing year is the one of Japanese cars. And this can be seen in the car auction industry too. The Japanese import car auctions are starting to become more and more attractive for people who need a reliable car.

People have now realized that the Japanese import cars are some of the best in the market. The Japanese import car auctions are based on the idea that people know and will easily find out if they don’t, that the Japanese cars are some of the most reliable cars in the world. Also they aren’t too expensive and they have great performances. The design is also starting to improve, in order to satisfy the taste of other cultures as well.

The Advantages of a Japanese Import Car Auction

The Japanese import car auction has a few advantages. One of them is that from such auctions you can buy a good car without having to spend all your savings. The Japanese cars are usually in great shape and are also less expensive than other types of cars. For example, the German cars are much more expansive than the Japanese import cars.

Another reason why the Japanese import car auctions are wanted is that everybody knows how reliable the Japanese cars are. Also they don’t require too much maintenance and the spare parts are also pretty cheap. You don’t have to spend big if you have to repair something on your Japanese car.

What to Look for in a Japanese Import Car Auction

When at a car auction, and the Japanese import car auction makes no exception from this rule, you have to look for several aspects before actually buying a car. The main criteria and the most favorite ones also, are the vehicle’s condition and price. These aspects are as normal as they can be. When buying a car you definitely want to buy one that is in good shape, so that you won’t have to spend more money on its repairing.

If you are looking for a online car auction you should stop by the best online car auction site.

Article Source:expert=Robert_Darby

all about your car

best car videos

car accident videos

Car Audio Installation



Car audio installation is a fairly specialized job, requiring at least some knowledge about the basics of car designs and electronics. The final audio output depends to a large extent on good installation. You may buy the best equipment, but if it is not properly installed, then the result will be poor. The entire set up consisting of wires, amplifiers, alternators, and speakers would have to be perfectly set up for that great audio effect.

Speaker location is perhaps the most important part of setting up your car audio. Determining where you are going to place your speakers is the first step you have to take. The designs of cars are such that the listener isn't placed perfectly in middle of the two speakers. What we mean to say is that the distance between the left speaker and the left ear is not the same as the right ear and the right speaker, which is a traditional audio setup. You can easily avoid this problem by making the distance between the left and right as little as possible. Some people try to place an extra speaker on the dashboard. The problem with this is that this speaker on the dashboard rips the sound into two, making for unpleasant hearing. You can try placing the audio in different locations around the car and arrive at the proper configuration for your speakers. Another mistake which commonly occurs is that people tend to go for looks rather than the sound, when it comes to car audio. Try to listen, rather than look. Some unlikely places inside your car may be the best for placing speakers.

Choosing the location of subwoofers and amplifiers is relatively easy. You can place them where you feel they will look good. One thing to keep in mind, though, is that different equipment may interfere with each other, if improperly placed. The next step is the wiring part, which is equally important. The thing with laying cables is to buy the correct cable keeping in view the capacity of the amplifier and speakers. Next in line is the installation of the head unit and amplifiers. Once you install them, you have to select the correct type of speaker enclosure. Although the choice is yours, you can try different types of enclosures and choose one which gives the best audio output. A final fine tuning, preferably with professional help and your car audio installation is done.

car audio provides detailed information on Car Audio, Discount Car Audio, Wholesale Car Audio, Car Audio Systems and more. Car Audio is affiliated with Car Stereo Installations.

Article Source:expert=Peter_Emerson

all about your car

best car videos

car accident videos